AIQ00ZPFC-01NL 75 watts total power: 75 watts input voltage: 100 - 122 vac # of outputs: single special features ? unity power factor ? high effciency - up to 90% ? civil/aviation supply frequency range 360 - 800 hz ? up to 75 w output power ? negative enable function ? rtca-do 160 compliant ? 100 c baseplate operating temperature ? enable output to control dc-dc converter ? internal active switch bypassing external inrush current components ? rohs compliant safety ? ul cul 60950 recognized ? tuv en60950 licensed electrical specifcations input input ra nge 100 - 122 vac input surge 180 vac / 1s input frequency 360 - 800 hz effciency 2 90% @ 115 vac, 75 w (typical) total harmonic rtca-do 160 compliant power factor up to 800 hz @ > 25 w 0.99 typical (115 vac; 50-360 hz; 75 w) 0.98 typical (115 vac; 800 hz; 75 w) control ld enable direct drive output to opto-isolator pfc enable neg ttl compatible voltage adjust -0% + 30% max. output output voltage 393 vdc typical overvoltage protection 430 vdc output power limit 90 w at vin = 95 vac isolation i/o isolation none input to baseplate 2700 vdc output to baseplate 2700 vdc leakage current < 1 ma at 800 hz input frequency data sheet environmental specifcations operating ambient temperature range -20 c to +100 c (baseplate temperature) storage temperature -40 c to 120 c overtemperature protection 120 c max. calculated mtbf > 1 million hours power
ordering information model number description notes AIQ00ZPFC-01NL 75 w low profle pfc module negative enabled mechanical drawings section a-a 36.83 0.5 section a-a ? 4.50 (0.177) section a-a m3 x p0.5 ? 3.30 ? 4.50 (0.177) ? 4.15 (0.163) 0.64 0.05 sq. pi n (6x) b a a a c 10 11 9 8 7 6 4 3 1 57.91 0. 5 47.24 2.54 9.12 2x ? 1.0 0.05 i/p pin (2x) ? 1.0 0.05 /p pin (3x) insert punched from bottom side 2.54 4.16 2.5 6.35 6.35 12.70 26.16 36.83 0.5 13.95 4.7 3.5 (0.14 ) [no thread] 2.0 (0.08 ) [no thread] 2.0 12.7 -0.5 +1 output input AIQ00ZPFC-01NL series data sheet
AIQ00ZPFC-01NL ds 18may2016 notes: 1. all specifcations subject to change without notice. mechanical drawings are for reference only. 2. warranty: 1 year 3. label and logo appearance may vary from what is shown on mechanical drawings.. pin assignments input (ac) output (dc) control pins 10. l1 7.0 positive 1. pf enable 11. l2 8.0 negative 2. voltage adj. 9.0 inrush 3. temp mon. 4. ld enable 5. pfw 6. gnd AIQ00ZPFC-01NL series data sheet worldwide offices americas 2900 s.diablo way tempe, az 85282 usa +1 888 412 7832 europe (uk) waterfront business park merry hill, dudley west midlands, dy5 1lx united kingdom +44 (0) 1384 842 211 asia (hk) 14/f, lu plaza 2 wing yip street kwun tong, kowloon hong kong +852 2176 3333 for more information: www.artesyn.com/power for support: productsupport.ep@artesyn.com www.artesyn.com artesyn embedded technologies, artesyn and the artesyn embedded technologies logo are trademarks and service marks of artesyn embedded technologies, inc. all other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. ? 2016 artesyn embedded technologies, inc. all rights reserved. for full legal terms and conditions, please visit www.artesyn.com/legal.
|
